SpectraPak: LC3000 Labeler/Capper.

As the caps are placed onto the top of the bottle, they are slightly pressed onto the bottle but not completely tightened.

After the caps are sorted, they are conveyed to the final Cap Application Chute where they will await placement onto the filled bottles.

The labeling process incorporates the Original Label Spool, a series of Roller Tension Pins and a Spool Take-Up Wheel for label dispensing.

The LC3000 includes a large-capacity Cap Hopper that holds a full carton of caps. The top of the Cap Hopper is located at approximately 48" above the floor level for easy loading.

The LC3000 is one of the most unique Labeling and Capping systems available. A unique feature of the LC3000 is that the system combines both capping and labeling functions in one movement. Both systems can be mounted on the same durable frame and share similar electrical connections, air supplies and mounting fixtures. This helps to reduce the overall system cost and lessens the need for additional spare parts.

As the bottle enters the labeling area, the self-adhesive/pressure sensitive labels are automatically and accurately applied. The LC3000 includes a large-capacity Cap Hopper that holds a full carton on caps and automatically elevates the caps to the Automatic Cap Sorter.

After the caps are sorted, they are placed onto the top of the bottle. Once the cap has been properly fitted to the bottle it is then moved down the conveyor and into the CC3000 Automatic Cap Tightening Device. The LC3000 can be designed to effectively operate with either 28mm or 38mm flat and sports type caps.

<< Back